Our company is a representative of Lechler company for Serbian market. It is our goal to expend Lechler products in Serbia, and to help our customers to get the best product for their use. Lechler GmbH is a family business based in Metzingen, Baden-Württemberg. The company develops and manufactures spray nozzles of different materials for various applications and is among the leading companies in the world market. For over 125 years, Lechler products have earned a reputation for excellent quality.
Official website: www.lechler-agri.de
Agricultural nozzle catalogue:
Standard flay spray nozzle ST
Spray angle: 110°/80°
Material: POM, ceramic, brass (on request)
Features
- Flat spray nozzle
- Nozzle sizes 01 through 08
- Pressure range 2.0 to 5.0 bar
- Fits all bayonet cap systems with 8 mm AF and threaded caps
- Colour coded acc. to ISO standard 10625
Range of application
- Application of plant protectants and growth regulators
Multirange flat spray nozzle LU
Spray angle: 120°/90°
Material: POM, stainless steel, ceramic
Features
- Multirange/Universal nozzle
- Nozzle sizes 01 through 08
- Pressure range 1.5 to 5.0 bar
- Fits all bayonet cap systems with 8 mm AF and threaded caps
- Low-drift application up to 2.5 bar
- Fine, medium and coarse droplets, depending on the size of the nozzle and the applied pressure
Range of application
- Application of plant protectants and growth regulators
Air-injector compact nozzle IDK
Spray angle: 120°/90°
Material: POM, PP, ceramic
Features
- Air-aspirating flat-spray nozzle
- Pressure range:
IDK-01 to -03: 1.5 to 6 bar
IDK-04/-06: 1.0 to 6 bar
IDKN-03/-04: 1.0 to 6.0 bar - Very low drift potential and loss-reducing effect in pressure range up to 3.0 bar (according to size)
- At pressures above 3 bar, less drift resistance than other well-known ID/IDN nozzles, i.e., coarse-tomedium droplet size characteristic
- Very compact design (8 mm width across flats, 22 mm long)
- Fits all bayonet cap systems with 8 mm AF and threaded caps
- Combines with IDKS end nozzle (of equal size), for sharply defined edges
- Included in the lists of »Drift-and-loss-reducing Techniques« LERAP, JKI (former BBA), Staatscourant, SPF, Hjälpreda, ÖAIP and Equipement de limitation de la dérive de pulvérisation
Range of application
- Application of plant protectants and growth regulators
- Well-suited for application of liquid fertilizer (UAN);
pressure range for pure UAN:
IDK-01 to -03: 1.5 to 2.5 bar,
IDK-04 to -06; IDKN-03/-04: 1.0 to 2.5 bar
Benefits of IDK nozzles
- Inexpensive alternative to conventional standard-type nozzles
- Easy installation, with no adapter necessary
- One-piece nozzle with reproducibly fixed-position injector for toolless removal
- Hard-wearing and non-clogging thanks to lateral air-aspirating channels of ample size
- Very good deposition structure and canopy penetration
- Designed for »good modern practice«, i.e. for use at wind velocities up to 5 m/s and higher sprayer speeds
Air-injector nozzles ID3
Spray angle: 120°
Material: POM, ceramic
Features
- Air-aspirating flat-spray nozzle
- Nozzle sizes 01 through 08 Pressure range 2.0 to 8.0 bar
- Extremely low drift potential for whole pressure range
- Significantly improved deposition structure thanks to aerated droplets
- Fits all bayonet cap systems with 10 mm AF and threaded caps (Ø 12.6 mm)
Range of application
- Application of plant protectants and growth regulators
- Particularly well-suited for application of liquid fertilizer (UAN);
pressure range for pure UAN: ID 2.0 to 3.5 bar; IDN 2.0 to 3.5 bar
Main benefits of ID3 nozzles
- More solid design of nozzle body by filed construction
– 0.9 cm shorter in comparison to ID range
– Improved protection of nozzle tip by reinforced side walls
– Easier cleaning of nozzle body by smooth transition - Plane injector orifice
– Easy wipe away of residues and dirt
– Toolless removal and assembly of injector e.g. for cleaning purpose
– Correct alignment of injector into the nozzle body by inside catch
– Safe sealing between injector and nozzle body by o-ring - Extended pressure range from 2.0 to 8.0 bar
- Long injector design responsible for high drift stability
– Reduced fine droplet fraction also at higher pressure
– Increased work rate at higher speeds
– Even better adaption of sprayer speed and l/ha-rate without changing of nozzles
– Application in due time even under worse weather conditions
– For use at wind speeds up to 5 m/s according to good agricultural practice
– Potential of 90% drift reduction at 2.0 bar - Proved materials such as POM or ceramic available depending on application conditions
- Non sensitive towards clogging due to big cross sections
- Very good deposition structure and crop-canopy penetration ensures high biological performances
Twin flat spray air-injector compact nozzle IDKT
Spray angle: 2 x 120°
Material: Ceramic
Features
- Air-aspirating twin flat spray nozzle
- Pressure range:
IDKT-02 to -025: 1.5 to 6.0 bar
IDKT-03 to -06: 1.0 to 6.0 bar - Fans are angled with 60° between each spray pattern forward and backward
- Droplet spectra extreme coarse to medium
- Very low drift potential in pressure range up to 3.0 bar
- Very compact design – only 22 mm long
- Fits all bayonet cap systems with 8 mm AF and threaded caps
- Included in the lists of JKI (former BBA), ÖAIP and Hjälpreda
Range of application
- Particularly contact (semi-) systemic plant protectants
- Ears treatment
- Potato blight control and desiccation
- Vegetable-growing
- Grass control
- All herbizide applications in particular on low fillage systems
Benefits of IDKT-nozzles
- Very low drift potential compared to conventional Twin nozzles
- Thanks to two fans, increased number of droplets and impacts compared to normal air-injector nozzle
- Excellent coverage on dense foliage and vertical targets (stalk, ears)
- Easy wiping off of dirt on injector ceramic orifice
- Little danger of clogging at the nozzle tip thanks to central afflux profile
Asymmetrical twin flat spray air-injector nozzles IDTA
Spray angle: front 120° / back 90°
Material: Ceramic
Features
Extremely low-drift, air-aspirating air injector twin flat spray nozzle for optimized deposition and reduced spray shadow at higher driving speeds.
Range of application
- Plant protection products and growth regulators
- Border applicationcan be combined with border nozzle IS 80
- Golf course
Main benefits of IDTA nozzles
- High drift reduction over entire pressure range (approvals pending for IDTA 120-025/03/04/05 applied in Germany, the UK and the Netherlands)
- Nozzle in cap with MULTIJET bayonet system
- Twin flat spray jet 30°/50° with asymmetrical spray angles and flow rates
– 120° to the front in driving direction with approx. 60 % flow rate share
– 90° to the rear with approx. 40 % flow rate share
– 90°/120° gives on the target area the same spray width
– Finer droplet spectrum to the front in driving direction for optimum wetting
– Coarser, more drift-resi-stant droplet spectrum to the rear
– Precise border application in combination with IS border nozzle - In comparison with standard air-injector flat spray nozzle on vertical target surfaces:
– Overall coverage twice as high
– Significantly higher, more uniform deposition at the front and rear - Optimum user protection thanks to removal/installation of the injector with protective gloves without tools (Patent)
Hollow cone nozzles TR
Spray angle: 80°
Material: ceramic
Features
- Hollow cone nozzle with ceramic orifice and swirl insert
- Nozzle sizes 005 through 05
- Pressure range 3.0 to 20.0 bar
- Highly wear and chemical-resistant ceramic of orifice and swirl insert
- Easy maintenance, by easily removable nozzle insert
- Secured nozzle insert prevents falling out
- High degree of coverage thanks to fine/very fine droplet spectrum
- Very good penetration thanks to hollow cone
- JKI approved (former BBA) (3.0 to 20.0 bar)
- Colour coding in accordance to ISO standard
- Optimal pressure range:
8.0 to 15.0 bar for space crops and special cultures
3.0 to 8.0 bar for broadcast spraying
Range of application
- Space crops (vines, orchards) and special cultures:
Plant protectants, sprayers with and without air assistance, recycling and tunnel sprayers - Horticulture: fungicides, insecticides, growth regulators, acaracides in watering cars
- Broadcast spraying: fungicides, insecticides, growth regulators, boom sprayers with and without air assistance
Air-injector compact nozzle IDK 90
Spray angle: 90°
Material: ceramic
Features
- Air-aspirating flat spray nozzle
- Nozzle sizes 01 through 03
- Pressure range 2.0 to 20.0 bar
- Flow rates see page 32
- Heavy-duty, chemical-resistant ceramic
- One-piece nozzle with easily removable injector; reproducible reassembling
- Large, non-clogging cross sections of flow
- Compact design (22 mm short)
- Fits all bayonet cap systems with 8 mm AF or threaded caps (Ø 12,6 mm)
- Safe & sure, adaptorless mounting, easy alignment
- Droplet spectrum: very coarse to medium
- Optimal spray pressure: 2.0 – 15.0 bar
- High drift reduction potential
- Included in the lists of »Drift-and-loss-reducing Techniques« JKI (former BBA) and ÖAIP.
Range of application
- Application of plant protectants to space crops (vines, orchards) and special cultures
- Works with and without air assistance (from airblast sprayer)
- Use in recycling- and tunnel-sprayers
Main Benefits of IDK 90 in airblast sprayers
- Shortest air-injector flat fan nozzle for air blast sprayers
- Only 7 mm longer than Hollow cone nozzle TR
- One piece nozzle with easily removable injector; reproducable reassembling
- No clogging due to ample lateral air aspirating orifices
- Very low drift potential at 2.0 to 8.0 bar
- Dirt on injector ceramic orifice can be wiped away easily
- ISO colour-coded for simple replacement of ID, IDK, AD and TR nozzles
- No visible spray mist
- No »wet fan«
- Optimal air flow application via flat jet
Liquid Fertilizer Nozzles FD
Spray angle: 130°
Material: POM
Features
- Flat spray nozzle with horizontal jet formation
- Nozzle sizes 03, 04, 05, 06, 08, 10, 15, 20
- Pressure range: 1.5 to 4.0 bar
- Hard wearing and corrosion resistant material
- Nozzle and cap one piece, fits to standard nozzle holder system MULTIJET
- ISO colour coded for ease identification
- Intermediate- and extension adaptor
- Height of spray boom:
50 – 70 cm at 50 cm nozzle spacing
Range of application
- Liquid fertilizer
- Irrigation
- Watering car
- Turfgrass spraying
Benefits of FD nozzles
- Extremely gentile application of fertilizer by horizontal jet formation
- Danger of crop scorch reduced to a minimum by extreme coarse droplets
- Optimised cross distribution across the spray boom according to JKI (former BBA) requirements for flat fan nozzles
- No streaking anymore in the crop
- Considerable less clogging than multi orificenozzles
- Fits to all current boom types as the nozzle tip is placed distinct lower
- Toolless removal of dosing orifice for cleaning purpose
Flood nozzles FT
Spray angle: 140°
Material: stainless steel, POM
Features
- Flat spray nozzle
- Nozzle sizes 0.5 to 10.0
- Pressure range 1.0 to 3.0 bar
- Little danger of clogging thanks to ample free cross sections
- Compact design
- Automatic nozzle alignment by fixation with bayonet caps (TWISTLOC 065.202.56.50; MULTIJET A.402.908)
Range of application
- Broadcast spraying
- low-drift application at pressures of 1.0 to 2.0 bar
- particularly well-suited for use in applying soilincorporated herbicides and liquid fertilizers
- Small implements, e.g. for knapsack sprayers
- Boom irrigation, e.g. for watering cars
5-orifice nozzles FL (for liquid fertilizers)
Material:
nozzle body: stainless steel, POM
dosing orifice: stainless steel
Features
- 5-orifice nozzle with horizontal jet formation
- Nozzle sizes grey and black
- Pressure range
Dosing orifice
0.8 to 1.0: 1.0 to 5.0 bar
1.2: 1.0 to 4.0 bar
1.5 to 1.8: 1.0 to 3.0 bar - Fits all bayonet cap systems with 10 mm AF and threaded caps
- Drift prevented by large drops
- Easy adjustment of liter-per-hectare rate via exchange of dosing orifices
- Dosing orifices made of solid stainless steel and, hence, resistant to wear and corrosion
- Plant-protective spraying of fertilizer thanks to extremely coarse (dribble) application
- Uniform distribution of fertilizer across the entire effective width
- Height of spray boom: 1.0 m
Range of application
- Liquid fertilizer